Precor Experience Series Service Manual page 45

INFORMATION DISPLAY
MAIN CONSOLE SW*
SER NUMBER
or
SERIAL NUMBER
USAGE LOG
Error Log
MODEL
ACTIVE STATUS LIGHT
(1) ASL equipped machines only.
(2) TRM600 series treadmills only.
(3) SCL800 StairClimber only.
(4) Not used on SCL800 models.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
LED Console Standard Service Menus
DESCRIPTION
*P31 console only.
Shows the serial number of the machine if input.
The base serial number can be set using the
WinCSAFE computer software.
Factory default: NONE.
Provides the total number of times a particular
workout has been used and the total elapsed
Time used for the workout.
Use the up/down arrows to scroll thru the avail-
able workouts.
Table of stored error event codes, see
Log & CPA Event Log" on
TIP: You can quickly access the Error log by
holding down the PAUSE key. Will show the
STUCK KEY message when there are no
logged error codes.
Machine detected model.
Result: SCL800
(Located in the Hardware Validation menu on
some models)
Showa the current ASL state color (blue. pulsing
blue, yellow, pulsing yellow) or switched OFF on
some models:
4 Standard Service Menus
"Error
page 182.
Page 36