Asl Settings And Functions - Precor Experience Series Service Manual

ASL State
major function and the machine is out-of-service. Machine service is
required.

ASL Settings and Functions

Setting the ASL light brightness level
The ASL Light Brightness level settings are HIGH, MEDIUM, and LOW. On P10, P30, P30i
and P31 consoles, the light brightness level can be switched OFF.
On P10, P30, P30i and P31 consoles, the OFF setting switches the ASL light bright-
l
ness OFF for all ASL state conditions. Setting the ASL Light Brightness OFF only
switches the ASL light brightness OFF and not the ASL active status functionality.
Regardless of the brightness level setting (including OFF), you can view the current
l
ASL state (blue, yellow, etc.) in the service access menus, see
ASL state" on the facing
P10, P30, P30i and P31 consoles:
Access Hardware Validation (51765761) > AS LIGHT BRIGHTNESS > select HIGH,
MED, LOW, or OFF.
SCL800 P31 Consoles:
Access Club Settings (5651565) > SET ASL BRIGHTNESS > select HIGH, MED,
LOW, or OFF.
P62, P80, and P82 consoles:
Access Hardware Validation (51765761) > Maintenance menu > AS LIGHT
BRIGHTNESS > select HIGH, MED, or LOW.
Disabling the ASL Maintenance Reminder
When set to ON, the ASL maintenance reminder - pulsing blue light state is triggered ON
when the maintenance counter counts down to zero miles (or zero hours). When set to OFF,
the ASL Maintenance Reminder counter is ignored and the ASL state is not changed to
pulsing blue.
The "OFF" setting effectively disables the ASL "blue pulsing" state without affecting
l
the yellow or pulsing yellow fault states.
When set to OFF, the Maintenance Reminder counter continues counting down the
l
miles (or hours) remaining which can be viewed in the service access menu, see
"Viewing the current ASL state" on the facing
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
DESCRIPTION
page.
Active Status Light "ASL"
"Viewing the current
page.
7 Troubleshooting
Page 190