Moving Arms Replacement; About; Procedure - Precor Experience Series Service Manual

Moving Arms Replacement

About

This procedure provides instruction to remove and install the Moving Arms.
Specifications
System Component
Moving Arm/Link Arm Bolt
Inner/Outer pivot shaft set screws

Procedure

Review entire procedure before starting.
Removal Instructions
Repeat this procedure for both the right and left Moving Arms.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Moving Arms Replacement
Specification
300 +/- 90 in-lbs (34 +/- 10 Nm)
300 +/- 90 in-lbs (34 +/- 10 Nm)
Page 147