Precor Experience Series Service Manual page 141

3. Tension the first stage drive belt to 140-150 lbs (63.5 - 68 kgs), see
Belt Tension Adjustment" on
4. Verify that the second stage drive belt is within the specified tension 110-120 lbs (50-
54.4 kgs), see
belt if not within specification.
5. Tighten the two Drive Components assembly carriage bolt fasteners, torque to 180 in-
lbs (20.3 Nm).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 52.
"Second Stage Drive Belt Tension Adjustment" on
6 Replacement Procedures
Input Drive Assembly Replacement
"First Stage Drive
page 56. Retention
Page 132