Replacement Procedure
Removal Instructions
Review entire procedure before starting.
1. Remove the left Drive Disk cove, see
2. Remove the one #2 Phillips screw fastener and
part(s) and/or fastener(s) for installation.
1
Lower Printed Circuit Assembly board; also refered to as the Lower PCA or simply as the
lower board. On treadmills, it is the console to base function interface and the motor con-
troller unit (MCU). On self-powered units, it is the lower PCA console to base function inter-
face.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
" > " on
page 80.
1
LPCA
/Battery Module cover. Retain
6 Replacement Procedures
Battery Replacement
Page 94