First Stage Drive Belt Replacement; About; Videos - Precor Experience Series Service Manual

First Stage Drive Belt Replacement

About

This procedure provides instruction to remove and install the First Stage Drive Belt.
A Two Stage Input Drive system utilize a two stage drive belt system, a first stage drive belt
and second stage drive belt, that uses a Step-up Pulley/Tensioner assembly to connect the
input drive assembly to the generator/brake assembly. Always adjust the first stage drive
belt first and then the second stage drive belt.
Specifications
System Component
First Stage Belt Drive Tension - New
First Stage Belt Drive Tension - Used
Drive Component Assy Carriage Bolts
(1) New belt tension applies to new belt first time installations. Used belt tension applies
to reinstalling an existing belt or when re-tensioning an existing used belt.

Videos

EFX600/700/800 Dual Stage Input Drive
Belt Tension Verification
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
(1)
(1)
Service Video
6 Replacement Procedures
First Stage Drive Belt Replacement
Specification
140-150 lbs (63.5 - 68 kgs)
125 - 135 lbs (56.7 - 61 Kgs)
110-120 lbs (50- 54.4 kgs)
EFX600/700/800 Dual Stage Input
Drive Belt Tension Verification
Link
Page 96