Precor Experience Series Service Manual page 201

Resetting the maintenance counter resets the ASL state to solid blue. The maintenance
counter is also reset to the default value (treadmills reset to 1000 miles, ellipticals reset to
250 Hrs, SCL800 resets to 1,100,000 steps).
P10, P30, P30i and P31 consoles:
1. Access Information Display (65).
2. Scroll to MAINT COUNTER > OK.
3. Hold down the PAUSE, START (P31i), or STOP (SCL800 P31) key for 3 secs or
more until the maintenance counter is reset. The "HOLD TO RESET MAINTENANCE
COUNTER" message will show, and the maintenance counter is reset to the default
setting. The ASL state is reset to the blue solid state
P62, P80, and P82 consoles:
1. Access Service Settings (51765761) > Maintenance menu.
2. Select Next Maintenance Due > Reset.
Clearing the Yellow & Yellow Pulsing ASL states
An ASL pulsing yellow state is triggered when an error code event occurs and is logged. To
clear a pulsing yellow state, the error condition causing the ASL pulsing yellow must first be
resolved either manually or the machine may resolve and self-clear the issue. A manually or
machine self-cleared error code will change the ASL state from pulsing yellow to the solid
yellow state.
Clearing the pulsing yellow ASL state
An ASL pulsing yellow state is triggered when an error code event occurs and is logged. To
clear a pulsing yellow state, the error condition causing the ASL pulsing yellow must first be
resolved either manually or the machine may resolve and self-clear the issue. A manually or
machine self-cleared error code will change the ASL state from pulsing yellow to the solid
yellow state.
Clearing the solid yellow ASL state
P10, P30, P30i and P31 consoles:
Clearing the error code from the Error Log resets the ASL state from solid yellow to the solid
blue state.
P62, P80, and P82 consoles:
1. The Maintenance > Operating Condition parameter must be reset from the Inspect
condition to the Normal condition. After resetting the Operating Condition to Normal,
the ASL state will change from solid yellow to the solid blue state.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
7 Troubleshooting
Active Status Light "ASL"
Page 192