Precor Experience Series Service Manual page 112

1. Install the second stage drive belt by walking the belt onto the Generator/Brake
assembly and larger second stage Step-up Pulley/Tensioner assembly pulleys.
Rotate the crank and make sure that the belt is properly aligned and seated on both
pulley grooves. Adjust the second stage tensioner just enough to hold the tensioner
mechanism and belt in place.
2. Install the first stage drive belt by walking the belt onto the input drive and smaller first
stage step-up pulleys. Rotate the crank and make sure that the belt is properly
aligned and seated in the pulley grooves. Adjust the first stage tensioner just enough
to hold the tensioner mechanism and belt in place.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Second Stage Drive Belt Replacement
Page 103