Precor Experience Series Service Manual page 180

2. Reinstall the rear two nut plates and secure using the four bolts. Fully tighten and
torque to 96 in-lbs (10.8 Nm).
3. Fully tighten the two front display mount weldment mounting bolts and torque to 204
in-lbs +/- 60 (23 Nm +/- 6.8).
4. Reinstall the left and right stairarms, see
5. Reinstall the Side covers (see
Front Top cover (see
Ramp Transition Cover Replacement" on
6. Verify equipment operation and return to service, see
page 19.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Stairarm Replacement" on
"" on page 68), Front Rear cover (see
"" on page 64), and the Drive Ramp Transition cover (see
page 76).
6 Replacement Procedures
Ramp Replacement
page 152.
"" on page 66),
"Operation Verification" on
"Drive
Page 171