Videos
Rear Drive Covers Replacement
Procedure
Removal Instructions
Repeat this procedure for both the right and left drive housing covers.
1. Remove the Drive Access panel, see
2. Remove the left and right Drive Disk coves, see
3. Remove the left and right Stairarms off the Input Drive Cranks, see
ment" on
page 152.
4. Remove the ramp-to-drive transition cover by pulling the bottom edges slightly apart
and lifting upward to remove.
5. Remove the drive top cover:
a. Remove the two top cover #3 Phillips screw fasteners. Retain part(s) and/or
fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Service Video
"" on
6 Replacement Procedures
Covers and Panels Replacement
Rear Drive Covers Removal
page 78.
" > " on
page 80.
Link
"Stairarm Replace-
Page 85