Precor Experience Series Service Manual page 30

Vary the INCLINE from minimum to maximum and back to minimum, Verify
l
that the crossramp raises smoothly to the maximum level and returns
smoothly to the minimum level.
Verify that the console INCLINE indicators and workout displays are show-
l
ing correct information.
Heart Rate Monitor Test
Verify both the Handheld Handlebar Heart Rate
operation.
1. Handheld Handlebar Heart Rate (HHHR) monitor verification
LED consoles (P10, P30, P30i and P31) only: Access the Diagnostic menu
(51765761) > select HEART RATE TEST and follow prompts to run the test:
Touchscreen consoles (P62, P80, and P82) only: Access the Service menu
(51765761), select System Settings > System Tests > HEART RATE TEST
and follow prompts to run the test.
2. Wireless Heart Rate monitor verification.
Use a wireless heart rate monitor chest strap (pn PPP000000038819103 or
3
ANT+ wireless compatible HR chest strap) and verify that the console heart rate
icon is flashing, and the HR indicator is showing the heart rate beats per minute
(bpm).
Return to service
1. Make sure that the machine is setting level and stable.
2. Make sure that any external power cords or interface cables are properly routed,
connected, and safe from being damaged.
3. On successful completion of all verification tests, return to service.
1
Handheld Handlebar Heart Rate
2
Heart Rate
3
ANT+ (pronounced ant plus) is a wireless protocol for monitoring sensor data such as a
person's heart rate or a bicycle's tire pressure
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
machine leveling procedure
3 Operation Verification
Operation Verification Tests
1
(HHHR ) and wireless
2
HR monitor
Page 21