Badge Carrier Assy Cover Replacement; Front Top Cover Replacement - Precor Experience Series Service Manual

Badge Carrier Assy Cover Replacement

This procedure replaces the Badge Carrier Assy cover
ID
Removal Instructions
1. To remove the badge carrier cover, use a small plastic flat blade screwdriver (or sim-
ilar tool) to pry and release the two cover mounting tabs from the display mount weld-
ment. Take care to not damage the cover edges or scratch the display mount
weldment paint while removing.
CAUTION: Only use nylon or plastic tipped screwdrivers (or similar device) to pry
and unsnap the goose neck cover. Metal tipped devices will scratch the surfaces
and damage the covers.
Installation Instructions
1. Align the two mounting tabs to the display mount weldment tab mounting slots and
press to snap the badge carrier assembly cover in place. Make sure the badge carrier
assembly cover tabs are securely fastened to the display mount weldment.

Front Top Cover Replacement

This procedure replaces the Front Top cover.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Badge Carrier Cover
6 Replacement Procedures
Covers and Panels Replacement
Page 64