Step-Up Pulley/Tensioner Assembly Exploded View; Procedure - Precor Experience Series Service Manual

Step-up Pulley/Tensioner Assembly Exploded View

Procedure

Review entire procedure before starting.
Removal Instructions
1. Remove the Drive Access cover, see
2. Remove the left and right Drive Disk covers, see
3. Remove the left and right Stairarms from the Input Crank, see
arm from the Input Drive Crank" on
4. Remove the Drive Top and left/right Drive Housing covers see
5. Remove the Drive Components assembly, see
Replacement" on
TIP: For machines with mfg. dates prior to 01/02/2019, the Step-up Pul-
ley/Tensioner assembly spacers (2x) and bolt isolators (4x) can easily fall out of the
mounting holes. Take care to keep track of these components for installation, see
"Step-up Pulley/Tensioner Assembly Exploded View"
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"" on
page 154.
page 119.
6 Replacement Procedures
Step-up Pulley/Tensioner Assembly Replacement
page 78.
" > " on page 80.
"Removing the Stair-
" > " on
"Drive Components assembly
above.
page 84.
Page 115