Precor Experience Series Service Manual page 170

b. Install the Inner Linkarm cover onto the Stairarm Linkarm mount
c. Then install the Linkarm onto the Stairarm weldment Linkarm mount. Secure
using 9/16" hex head screw and torque to 300 +/- 90 in-lbs (34 +/- 10 Nm).
d. Reinstall the Outer Linkarm Cover and secure using the #2 Phillips screw.
4. Verify operation and return to service, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
"Operation Verification" on
Stairarm Replacement
page 19.
Page 161