Precor Experience Series Service Manual page 108

3. Use a 1/2" socket to fully tighten the two Drive Components assembly bolts.
bolts to 180 in-lbs +/- 54 (20.3 +/_ 4.5 Nm).
4. Verify that the second stage drive belt is within the specified tension, see
Stage Drive Belt Tension Adjustment" on
cification.
5. Reinstall the right Stairarm, see
6. Reinstall the right and left Drive Disk coves, see
7. Reinstall the Drive Access panel, see
8. Verify operation and return to service, see
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 56. Retention the belt if not within spe-
"Stairarm Replacement" on
" > " on
"" on page 78.
"Operation Verification" on
6 Replacement Procedures
First Stage Drive Belt Replacement
Torque
"Second
page 152.
page 80.
page 19.
1
Page 99