Precor Experience Series Service Manual page 114

6. Use a 1/2" socket to tighten the two Generator/Eddy Brake assembly and the two
Drive Components assembly carriage bolts. Torque both bolts to 180 in-lbs +/- 54
(20.3 +/_ 4.5 Nm).
7. Reinstall the right Stairarm, see
8. Reinstall the right and left Drive Disk coves, see
9. Reinstall the Drive Access panel, see
10. Verify operation and return to service, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Second Stage Drive Belt Replacement
"Stairarm Replacement" on
" > " on
"" on page 78,
"Operation Verification" on
6 Replacement Procedures
page 152.
page 80.
page 19.
Page 105