P30I Consoles; P80 And P82 Touchscreen Consoles - Precor Experience Series Service Manual

P30i consoles

Available exclusively on the 700 Line Treadmill, the P30i Interval Console is an easy-to-use
console that facilitates interval training with one-touch speed and incline keys.
CONSOLE KEY
SPEED 1/2 - DWN/UP (US std)
SPEED 2/4 - DWN/UP (metric)
OK or INCLINE 0
INCLINE 0
PAUSE
INCLINE numeric keys

P80 and P82 touchscreen consoles

The P80 and P82 consoles use the touch sensitive touchscreen controls to select items and
navigate the service menus. Only one hardkey "Pause" is used to stop a running diagnostic
test.
Follow the on-screen prompts to run the diagnostic tests.
CONSOLE KEY
Touchscreen controls
Scroll Up/Dwn
BACK softkey
PAUSE hardkey
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
FUNCTION/DESCRIPTION
Use the SPEED numeric 1 & 2 keys to scroll up
and down through the current menu.
Selects the current menu item or confirms settings.
Returns to the previous menu level without saving
changes.
• Exits service mode
• Press and hold PAUSE for greater than 6 sec will
open the Error Log or show the "Stuck Key" mes-
sage when there are no logged errors.
Use as the numeric keypad to type in numeric
inputs (access codes etc.).
FUNCTION/DESCRIPTION
There is various touch sensitive softkey controls (OK.
START, STOP, BACK, etc.) and icon controls (image
boxes, buttons, etc.) used to control and operate the con-
sole. Make selection by touching the softkey control or
icon.
Use your finger to swipe the touchscreen up or down to
scroll through menu items. Some menus provide a ver-
tical scroll bar on the screen right side to scroll Up/Dwn.
• Use the touchscreen BACK softkey to return to the pre-
vious menu display.
• Continue selecting the BACK softkey to exit the service
software.
Stop a running diagnostic test.
4 Standard Service Menus
Navigating the Service Menus
Page 30