2. Attach the Linkarm to the Moving Arm:
a. Reinstall the Inner Linkarm cover onto the Moving Arm Linkarm mount.
b. Then place the Linkarm onto the Moving Arm linkarm mount and secure using
the 9/16" mounting bolt. Torque to 300 +/- 90 in-lbs (34 +/- 10 Nm).
c. Reinstall the Outer Linkarm cover and secure using the #2 Phillips screw.
3. Verify operation and return to service, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
"Operation Verification" on
Linkarm Replacement
page 19.
Page 146