Precor Experience Series Service Manual page 113

3. Adjust the first stage drive belt tension to specification, see
Tension Adjustment" on page 52
4. Use a 1/2" socket to fully tighten the two Drive Components assembly bolts.
bolts to 180 in-lbs +/- 54 (20.3 +/_ 4.5 Nm).
5. Adjust the second stage drive belt tension to specification, see
Belt Tension Adjustment" on
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
.
page 56.
6 Replacement Procedures
Second Stage Drive Belt Replacement
"First Stage Drive Belt
"Second Stage Drive
1
Torque
Page 104