Information Display - Precor Experience Series Service Manual

CLUB SETTINGS
SET ASL BRIGHTNESS
(1) Only used on products that have the ASL feature.
(2) Not included on all equipment models.

Information Display (65)

Service Access Code: 65 (see
Provides the equipment usage, hardware, software, error code, and maintenance inform-
ation.
INFORMATION DISPLAY
ODOMETER
HOUR METER
U-BOOT SW
or
BOOT LOADER SW*
U-BASE SW
or
1
Treadmill
2
StairClimber
3
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
(Located in Hardware Validation > AS LIGHT BRIGHTNESS
on some models)
Sets the ASL light brightness level.
Settings: Low, Medium, High, (EFX includes OFF)
Default: Medium
"Service Menu Access Codes" on
The odometer provides the accumulated
machine usage to date in units applicable to the
type of equipment being used.
1
• TRM / AMT: Cumulative units logged to date.
AMT also displays vertical strides.
• EFX: Strides logged to date
• Bike: Revolutions logged to date
• Climber/SCL
The total number of hours that the unit took to
accumulate unit miles (Steps on SCL800
StairClimbers) .
This value is stored in the upper
console so if that PCA is replaced the hours of
use would start again from "0".
The console upper boot software version inform-
ation.
*P31 console only.
The console upper base software version inform-
ation.
4 Standard Service Menus
LED Console Standard Service Menus
DESCRIPTION
page 22)
DESCRIPTION
2
: Floors climbed
3
PCA in the
Page 35