Precor Experience Series Service Manual page 107

the first stage drive belt.
Installation Instructions
1. Install the first stage drive belt by walking the belt onto the Input drive and the smaller
first stage Step-up Pulley/Tensioner assembly pulleys. Adjust the First Stage Ten-
sioner enough to hold the tensioner and belt in place. Rotate the crank and make sure
that the belt is properly aligned and seated in the pulley grooves.
2. Adjust the first stage drive belt tension to specification, see
Tension Adjustment" on
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 52.
6 Replacement Procedures
First Stage Drive Belt Replacement
"First Stage Drive Belt
Page 98