Second Stage Drive Belt Tension Adjustment; About - Precor Experience Series Service Manual

Second Stage Drive Belt Tension Adjustment

About

This procedure provides instruction to adjust the Second Stage Drive Belt tension.
A Two-Stage Input Drive system utilizes a first-stage drive belt and second-stage drive belt
system to connect the input drive assembly pulley to the generator/brake assembly pulley.
Always adjust the first stage drive belt first and then the second stage drive belt.
IMPORTANT: Adjust the first stage drive belt tension prior to adjusting the second
stage drive belt tension.
Specifications
System Component
Second Stage Belt Drive Tension - New
Second Stage Belt Drive Tension - Used
Drive Component Assy Carriage Bolts
(1) New belt tension applies to new belt first time installations. Used belt tension applies
to reinstalling an existing belt or when re-tensioning an existing used belt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Second Stage Drive Belt Tension Adjustment
(1)
110-120 lbs (50- 54.4 kgs)
(1)
92 - 105 lbs (43 - 47.6 kgs)
180 in-lbs (20.3 Nm)
5 Adjustment Procedures
Specification
Page 56