Precor Experience Series Service Manual page 153

b. Remove the 9/16" hex head cap screw and remove the Linkarm from the Stair-
arm Linkarm mount. Retain part(s) and/or fastener(s) for installation.
c. Remove the Inner Linkarm cover and Linkarm Transition cover from the Stair-
arm linkarm mount. Retain part(s) and/or fastener(s) for installation.
Installation Instructions
1. Attach the Linkarm to the Stairarm:
a. Reinstall the Linkarm Transition cover and then the Inner Linkarm cover onto
the Stairarm linkarm mount.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Linkarm Replacement
Page 144