Precor Experience Series Service Manual page 200

Error code events will still affect the ASL state condition even when the Maintenance
l
Reminder is set to OFF.
P10, P30, P30i and P31 consoles:
Access Club Settings (5651565) > MAINT CONFIG > select ON or OFF.
P62, P80, and P82 consoles:
Access Club Settings (5651565) > Maintenance menu > Maintenance Reminder >
select ON or OFF.
Viewing the current ASL state
The current ASL state (solid blue, pulsing blue, solid yellow; or pulsing yellow) can be
viewed using the service menu ACTIVE STATUS LIGHT parameter.
P10, P30, P30i and P31 consoles:
Access Hardware Validation (51765761) > ACTIVE STATUS LIGHT > current ASL
state.
SCL800 P31 Consoles:
Access Information Display (65) > ACTIVE STATUS LIGHT > current ASL state.
P62, P80, and P82 consoles:
Access Club Settings (5651565) > Maintenance menu > ACTIVE STATUS LIGHT >
current ASL state.
Viewing the ASL maintenance counter remaining miles, hours or steps
P10, P30, P30i and P31 consoles:
Access Information Display (65) > MAINT COUNTER:
Shows the remaining miles, hours, or steps to zero (maintenance due). Holding down
the PAUSE, START (P31i), or STOP (SCL800 P31) key will reset the counter.
P62, P80, and P82 consoles:
Access Service Software (51765761) > Maintenance menu > Next Maintenance
Due
The maintenance counter shows the remaining miles (or hours) until the machine main-
tenance is due. Reaching zero triggers the ASL pulsing blue "maintenance due" state.
Clearing the Blue Pulsing ASL State (Maintenance Counter reset)
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
7 Troubleshooting
Active Status Light "ASL"
Page 191