Precor Experience Series Service Manual page 139

Installation Instructions
1. Reinstall the Input Drive Assembly onto the weldment input module mounting bracket
and secure using four NEW Nylock patch bolt fasteners (see
bubble # 296). The removed washers can be reused for installation.
+/- 90 in-lbs (34 +/- 10 Nm).
CAUTION: Do not reuse the Crank and Input Bearing Assy Nylock patch bolt
fasteners for installation. Discard the bolts and order new bolts for installation (see
"Parts" on
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 204, bubble # 296).
6 Replacement Procedures
Input Drive Assembly Replacement
"Parts" on page 204,
1
Torque to 300
Page 130