5. Reattach the Linkarm to the Moving Arm:
a. Reinstall the Inner Linkarm cover onto the Moving Arm - Linkarm mount.
b. Then attach the Linkarm to the Moving Arm and secure using the 9/16" bolt,
torque to 300 +/- 90 in-lbs (34 +/- 10 Nm).
c. Reinstall the Outer Linkarm cover and secure using the #2 Phillips screw.
6. Reinstall the front top cover, see
7. Verify operation and return to service, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"" on
page 64.
"Operation Verification" on
6 Replacement Procedures
Moving Arms Replacement
page 19.
Page 151