Installation
Repeat this procedure for both the left and right stairarm wheel installation.
3. Reinstall the wheel axle into the wheel. Then place the wheel between the two
spacers and insert into the stairarm wheel bracket. Slide a new Nylock wheel mount-
ing bolt through the bracket, spacer, wheel axle, spacer, and opposite side of the
bracket. Thread the mounting bolt into the Retainer and torque to 100 in-lbs (11.3
Nm).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Stairarm Wheel Replacement
Page 167