Precor Experience Series Service Manual page 43

CLUB SETTINGS
SET MAX PAUSE TIME
SET COOL DOWN TIME
SET METRICS DEFAULT
SET CROSSRAMP
AUTO-LEVEL
SET CUSTOM PROGRAM
1/2
or
SET CUSTOM
WORKOUTS 1 AND 2
MAINT CONFIG
or
MAINTENANCE
CONFIGURE
or
MANINTENANCE
COUNTER
SET DISPLAY
BRIGHTNESS
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Default: 60 minutes
Limits how long equipment remains paused during a
workout before it resets to the Welcome banner.
Range: 1 to 60 seconds (1 to 120 seconds for treadmills).
Default 120 seconds for treadmills and 60 seconds for all
other equipment.
Sets the amount of time that a cool down period will occur at
the end of every workout.
Range: 0 to 5 minutes in 1 minute increments.
Default: 5 min
Sets a metric that may be of specific importance to the spe-
cific facility or fitness trainer. The selected metric will scroll
across the screen at regular intervals during the workout.
Default: OFF
Sets the crossramp default "Home" incline auto-level. The
crossramp will moive to the default incline level after 60 sec
of non-use.
Range: 0 - 20
Default: 1
WARNING: The crossramp will automatically drive to
the Default incline level after 90 sec of non-use.
You can create and save two custom workouts on your
treadmill and one custom workout on your other Precor
equipment.
Range: ON/OFF
Default: OFF
Note: The Total Body Workout can only be turned on in this
Club Settings menu.
(ASL equipped machines only)
Switch ON or OFF the ASL pulsing blue light maintenance
counter reminder function:
Range: ON - Enable, OFF - Disable
Default: ON
(not available on all models)
Sets the display light brightness level.
Settings: Low, Medium, High
Default: HIGH
4 Standard Service Menus
LED Console Standard Service Menus
DESCRIPTION
Page 34