Tools And Supplies; Specifications; Fastener Torque Specification - Precor Experience Series Service Manual

For cover removal and installation, see

Tools and Supplies

Tools and supplies required to complete the machine service and repair.
Tools
US and Metric Hex Key set
US SAE and Metric Wrench set
1
Torque wrench
US SAE and Metric socket set
US SAE and Metric Hex Key Socket
Bit set
Supplies
Super Lube Gel with Teflon by Permatex
Mobil 1, NLGI 2 Teflon Synthetic Grease
Loctite 243 Blue Medium Strength Thread-
locker

Specifications

Fastener Torque Specification

System component fastener torque specification:
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
2
digital volt meter
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Covers and Panels Replacement" on
Standard and Phillips screw driver set
External 0.047" Retaining Ring Pliers
2
DVM Multimeter
Belt Tension Gauge (recommended Kent-Moore BT-
33-73-F)
Cleaning rags
Cleaner Degreaser (Simple Green)
Cable ties (1- 3/4", 3", 4" lengths)
2 General Information
Tools and Supplies
page 61.
Page 9