Tools And Supplies - Precor Precision 400 Series Service Manual

Tools and Supplies

Tools and supplies required to complete the machine service and repair.
Tools
• US and Metric Hex Key set
• US and Metric socket set
• Us and Metric wrench set
• Cutters
• Rubber mallet
• Tape measure /Straight edge ruler
1
• DVM meter
1
digital volt meter
2
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center
of the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the
bolt.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
• Standard straight slot tip screw drive set
• Philips tip screw driver set
• US & metric Allen wrench set
• 7/16" Allen key, socket mounted
• Pliers
• Inner and outer snap ring pliers
2
• Torque Wrenches: 9 in lbs to 100 in - lbs
(83 ft-lbs)
2 General Information
Tools and Supplies
Page 10