Table of Contents
Advertisement
SUN600-(5KTL, 6KTL)-L0
User Manual
(1) LED indicators
(3) Hanging kit
(5) Heat sink
(7) DC switch locking screw hole
(9) DC input terminals (PV1+/PV1–)
(11) Reserved
(13) Antenna port (ANT)
(15) AC output port (AC)
2.3 Label Description
2.3.1 Enclosure Labels
Symbol
Issue 04 (2023-02-17)
NO TE
● Note a: The DC switch locking screw is used to lock the DC switch to prevent accidental
startup. It is delivered with the inverter.
● Note b: DC input terminals PV1 and PV2 are controlled by the DC switch.
Copyright © Huawei Technologies Co., Ltd.
(2) Front panel
(4) Mounting bracket
(6) Ventilation valve
a
(8) DC switch
(10) DC input terminals (PV2+/PV2–)
(12) Smart Dongle port (4G/FE)
(14) Communications port (COM)
(16) Ground point
Name
Delay discharge
Burn warning
2 Product Introduction
b
(DC SWITCH)
Description
Residual voltage exists
after the inverter is
powered off. It takes 5
minutes for the
inverter to discharge to
the safe voltage.
Do not touch a
running inverter
because it generates
high temperatures on
the shell.
17
Advertisement
Table of Contents
