Installing Netcol5000-C Enclosure Frames - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
----End

2.3.3 Installing NetCol5000-C Enclosure Frames

Context


Procedure
Step 1 Snap the front panel of the NetCol5000-C enclosure frame between the NetCol5000-C and the
cabinet so that the front surface of the front panel and the cabinet door frame are on the same
plane.
Step 2 Install connecting kits for the NetCol5000-C enclosure frame to connect the NetCol5000-C
and the cabinet to the left and right of the NetCol5000-C enclosure frame.
Issue 02 (2015-06-30)
Figure 2-17 Combining the adaptive frame with the cabinet
If your project has an odd number of NetCol5000-Cs, install a NetCol5000-C enclosure
frame so that the width of the NetCol5000-Cs is an integral multiple of 600 mm.
A NetCol5000-C enclosure frame consists of a front panel, rear panel, and top panel.
Perform the following steps to install a NetCol5000-C enclosure frame.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installing Cabinets
18