4-5-16.Disassembly Of The Fusing Unit - Minolta QMS PageWorks/Pro 1100 Service Manual

4-5-16. Disassembly of the Fusing Unit
1. Remove two screws.
2. Press the left and right claws (4 in total) and separate the upper and lower fus-
ing units.
4121s057
3. Remove the Backup roller.
4. Remove the Fusing Entrance Guide.
(1) Push the Guide to the left.
(2) Pull out the right end of the Fusing Entrance Guide.
(3) Pull out the left end.of the Fusing Entrance Guide.
Fusing Entrance Guide
4121s058
3704
(1)
(2)
(3)
59
Backup roller