(3) Removal of the Developing Unit
Remove the Developing Unit after the Toner Hopper Unit has been removed.
1. Developing Unit Cover
2. Slide out and then push down the
4. Remove the Developing
Unit.
Fig. 1
3. Slide out the Guide Rails.
Fig. 1 Developing Unit Mounting Position
Developing Unit
Alignment Mark
Developing Unit Pressure Lever.
Guide Rail Pin
1154D122AA
D-12
Note:
When the Developing Unit is slid out, the
AIDC Sensor should be cleaned.
1144D008AB
1154D121AA