S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
System Setup and Maintenance Settings
The following table describes the system setup and maintenance settings.
Table 75. System setup and maintenance settings
Feature
Boot code update
DHCP/manual IP address
System name configuration
Configuration save/restore
Firmware upgrade
Restore defaults
Dual image support
Factory reset
Port Characteristics
The following table describes the port characteristics.
Table 76. Port characteristics
Feature
Auto negotiating speed and full/half
duplex
Auto MDI/MDIX
802.3x flow control/back pressure
Port mirroring: TX, RX, Both
Port trunking (aggregation)
802.1D spanning tree
802.1w RSTP
802.1s spanning tree
Specifications and Default Settings
Sets Supported
1
1
1
1
1
1 (local browser interface and
front-panel button)
1
1
Sets Supported
All ports
For cross over cables on all ports
All ports
1
8
1
1
8 instances
361
Default
N/A
DHCP enabled, 192.168.0.239
N/A
N/A
N/A
N/A
Enabled
N/A
Default
Auto negotiation
Enabled
Disabled
Disabled
Preconfigured
Disabled
Enabled
Disabled
User Manual