Manage An Individual Poe Port - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. In the Power Cycle Ports section, click the port number icon for every port that you
want to reset.
When a port is selected, the port number icon displays solid purple.
6. When all the ports that you want to power cycle are selected, click the APPLY button.
PoE on the selected ports is forcibly reset.

Manage an individual PoE port

You can manage the settings on an individual PoE port.
To select a PoE port and configure the settings:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. On the SETTING menu, click the port number to open the port settings menu.
The port settings display.
6. Click the EDIT button.
The PoE port options display.
Maintain and Monitor the Switch 96 User Manual