Canon imageRUNNER ADVANCE C5255 Series Service Manual page 920

COPIER > ADJUST > COLOR
HD-OFS-Y Color balance adj of Y high dens area
Lv.2 Details To adjust the color balance of the high density area of Y.
As the value is larger, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Correct Density, Correct Shading, Auto Correct Color
Mismatch in user mode.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
HD-OFS-M Color balance adj of M high dens area
Lv.2 Details To adjust the color balance of the high density area of M.
As the value is larger, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Correct Density, Correct Shading, Auto Correct Color
Mismatch in user mode.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
HD-OFS-C Color balance adj of C high dens area
Lv.2 Details To adjust the color balance of the high density area of C.
As the value is larger, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Correct Density, Correct Shading, Auto Correct Color
Mismatch in user mode.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8
Service Mode > COPIER > ADJUST > COLOR
8 Service Mode > COPIER > ADJUST > COLOR
COPIER > ADJUST > COLOR
HD-OFS-K Color balance adj of Bk high dens area
Lv.2 Details To adjust the color balance of the high density area of Bk.
As the value is larger, the image gets darker.
This setting is linked with Adjustment/Maintenance> Adjust Image
Quality> Correct Density, Correct Shading, Auto Correct Color
Mismatch in user mode.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PL-OFS-Y Clr blnce adj of Y low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of Y at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PL-OFS-M Clr blnce adj of M low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of M at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
PL-OFS-C Clr blnce adj of C low dens area:PDL
Lv.2 Details To adjust the color balance of the low density area of C at PDL print.
As the value is larger, the image gets darker.
Use case Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this when the machine is operating correctly.
Display/adj/set range -8 to 8
Default value 0
8-100
8-100