Canon imageRUNNER ADVANCE C5255 Series Service Manual page 488

4
Parts Replacement and Cleaning > Fixing System > Removing the Fixing Assembly > Procedure
2) Pinch and pull out the tab of Fixing Assembly.
3) Hold the grip and remove the Fixing Assembly.
4 Parts Replacement and Cleaning > Fixing System > Removing the Fixing Assembly > Procedure
Tabs
F-4-294
F-4-295
CAUTION:
• When installing the Fixing Assembly, be sure to insert it until it stops and then tighten
the screws while holding the area [A] part as shown in the figure below.
[1]
[A]
• If the Fixing Assembly is not installed properly, abnormal noise from the Fixing Gear
or E009 may occur.
In such case, remove and then install the Fixing Assembly again.
4-168
[A]
[1]
F-4-296
4-168