Canon imageRUNNER ADVANCE C5255 Series Service Manual page 568

■ Copying System Software
● System CD to SST
Copy the system software stored in the system CD to SST.
NOTE:
The system software is compressed if the file size exceeds the CD memory capacity.
If the above is the case, decompress the file before copying it to SST.
Preparation
Requirements:
• PC with SST Ver.4.41 or later installed
• The system CD for this machine
Steps to copy the system software
1) Start the PC
2) Set the system CD in the PC
3) Start SST
4) Click "Register Firmware" button.
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Copying System Software
F-6-32
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Copying System Software
5) Select the drive where the system CD is set and click "Search" button.
6) The system software stored in the system CD is listed.
Uncheck the box(es) for unnecessary folder(s) and/or system software and click "Copy"
button.
6-30
F-6-33
F-6-34
6-30