Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1155

Hide thumbs Also See for imageRUNNER ADVANCE C5255 Series:
Table of Contents

Advertisement

11)
Install the USB Cable and Control Panel Communication Cable.
12)
If reader is installed, install the Reader Power Cable.
NOTE:
Handle the Reader Power Cable from the connector side and make a slack at [A] part.
Bend the Reader Power Cable at a right angle on [B] part.
x2
x2
Wire Saddles
13)
Remove the small cover installed in the Right Rear Cover 1.
• 1 Screw
• Claw in 2 places
9
Installation > Voice Operation Kit C2 > Installation Procedure
[A]
Cable Guide
[B]
Reader Power Cable
Connectors
F-9-214
x2
Claw
F-9-215
9
Installation > Voice Operation Kit C2 > Installation Procedure
14)
Cut the [A] part of Right Rear Cover 1 with nipper, etc.
CAUTION:
Be sure to remove adequately so that there is no burr.
15)
Install the Right Rear Cover 1. (3 Screws)
NOTE:
Do not close the Right Rear Cover 1.
16)
Close the Right Lower Cover and the Right Upper Cover.
9-85
[A]
[A]
F-9-216
9-85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents