Canon imageRUNNER ADVANCE C5255 Series Service Manual page 962

COPIER > FUNCTION > CLEAR
1TR-CLR Clear of primary transfer ATVC log
Lv.2 Details Although primary transfer ATVC control is executed based on the log
information, drastic changes in the resistance of the Primary Transfer
Roller, etc. may prevent an optimum transfer voltage from being set
because the control is not performed properly.
When the value (COPIER> DISPLAY> HV-STS> 1ATVC-Y/M/C/K4) of
current flown to the Primary Transfer Roller at ATVC control is out of
the appropriate target value range (50 to 700), clear the log information
for the appropriate control.
Use case - When replacing the Primary Transfer Roller
- When the environment (temperature and humidity) changes
drastically
- When any image failure occurs due to primary transfer
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range None
Related service mode COPIER> DISPLAY> HV-STS> 1ATVC-Y/M/C/K4
COPIER> FUNCTION> CLEAR> 2TR-CLR
2TR-CLR Clear of secondary transfer ATVC log
Lv.2 Details Although secondary transfer ATVC control is executed based on the
log information, drastic changes in the resistance of the Secondary
Transfer Roller, etc. may prevent an optimum transfer voltage from
being set because the control is not performed properly.
When the value (COPIER> DISPLAY> HV-STS> 2ATVC) of current
flown to the Secondary Transfer Outer Roller at ATVC control is out of
the appropriate target value range (50 to 700), clear the log information
for the appropriate control.
Use case - When replacing the Secondary Transfer Roller
- When the environment (temperature and humidity) changes
drastically
- When any image failure occurs due to secondary transfer
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range None
Related service mode COPIER> DISPLAY> HV-STS> 2ATVC
COPIER> FUNCTION> CLEAR> 1TR-CLR
JV-CACHE Cache clear of JAVA application
Lv.1 Details To clear the cache information used by JAVA application.
Use case When initializing the JAVA application
Adj/set/operate method Select the item, and then press OK key.
FXTX-CLR Clearing fax job information
Lv.1 Details To clear fax job information stored on SRAM.
Use this mode to restore from E611-0001.
Use case When E611-0001 occurs
Adj/set/operate method Select the item, and then press OK key.
8
Service Mode > COPIER > FUNCTION > CLEAR
8 Service Mode > COPIER > FUNCTION > CLEAR
COPIER > FUNCTION > CLEAR
LANG-CLR Uninstallation of language files
Lv.2 Details To uninstall the language files other than Japanese and English files.
After execution, the machine automatically enters the download mode.
Use case When installing a new language file while there are 7 installed
language files
Adj/set/operate method 1) Select the item, and then press OK key.
2) Select the firmware in which the necessary language is included by
SST, and perform downloading.
Caution The language files are not uninstalled if a language file is not installed
by SST after the execution of this service mode.
Supplement/memo Screen is displayed in English after the execution, so switch the
language.
FIN-MCON Clearing Finisher information
Lv.1 Details To clear the Finisher information which the Main Controller retains.
After execution, set the Delivery Tray again in user mode (Settings/
Registration> Function Settings> Common> Paper Output Settings>
Output Tray Settings).
Use case When switching to another type of Finisher in the field
Adj/set/operate method Select the item, and then press OK key.
Related user mode Settings/Registration> Function Settings> Common> Paper Output
Settings> Output Tray Settings
8-142
T-8-46
8-142