Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1171

11) Install the connector of Card Reader External Relay Harness.
12) Install the Connector Cover.
• 1 screw (screw removed in step 9))
CAUTION:
Install it in the position where the tie-wrap of Card Reader External Relay Harness is
inside the Connector Cover..
9
Installation > Copy Card Reader-F1 > Installation Procedure
13)
CAUTION:
• Lift the handle, insert the Main Controller PCB 1 until it stops, tilt the grip and install
• Make sure to tilt the grip slowly on both sides simultaneously.
• Check that the Main Controller PCB 1 is installed properly.
F-9-264
F-9-265
9 Installation > Copy Card Reader-F1 > Installation Procedure
Install the Main Controller PCB 1 to the host machine.
the 2 screws.
9-101
x2
Grips
F-9-266
9-101