Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1271

4) Fit the 2 bosses of Connector Fixing Block to the hole of Conversion Connector and install
it.
• 2 Screws (P Tight; M3x8)
CAUTION:
• Be sure to firmly hold the Connector Fixation Block when tightening the screws.
• Be sure to follow the correct order to tighten the screws, otherwise the
Conversion Connector may not be connected properly, resulting in poor contact.
x2
9
Installation > [TYPE-3] > Installation Procedure > Assembling and Installing the Option HDD
F-9-534
Boss
Hole
F-9-535
9 Installation > [TYPE-3] > Installation Procedure > Assembling and Installing the Option HDD
5) Install the HDD Cover.
• 1 Claw
• 1 Screw (TP round end; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
6) Install the HDD Handle.
• 2 Screws (TP round end; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
x2
9-201
F-9-536
F-9-537
9-201