Canon imageRUNNER ADVANCE C5255 Series Service Manual page 983

COPIER > OPTION > NETWORK
NS-CMD5 Limit CRAM-MD5 auth method at SMTP auth
Lv.2 Details To restrict use of CRAM-MD5 authentication method at the time of
SMTP authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-GSAPI Limit GSSAPI auth method at SMTP auth
Lv.2 Details To restrict use of GSSAPI authentication method at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-NTLM Limit NTLM auth method at SMTP auth
Lv.2 Details To restrict use of NTLM authentication method at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-PLNWS Limit plaintext auth at SMTP auth encry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
NS-PLN Limit plaintext auth at SMTPauth noencry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is not encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
NS-LGN Limit LOGIN authentication at SMTP auth
Lv.2 Details To restrict use of LOGIN authentication at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
MEAP-PN HTTP port No.setting of MEAP application
Lv.2 Details To set HTTP port number of MEAP application.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not specify port 8080 when the print server is connected.
Otherwise, you cannot browse the device RUI in which MEAP
authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side.)
Display/adj/set range 0 to 65535
Default value 8000
CHNG-STS Set of TOT status connection port number
Lv.2 Details To set the port number for status connection with T.O.T.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 20010
Related service mode COPIER> OPTION> NETWORK> STS-PORT
CHNG-CMD Set of TOT command connection port No.
Lv.2 Details To set the port number for command connection with T.O.T.
Use case When the Service NAVI is used
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 20000
Related service mode COPIER> OPTION> NETWORK> CMD-PORT
8-163
8-163