Canon imageRUNNER ADVANCE C5255 Series Service Manual page 971

COPIER > OPTION > FNC-SW
FXWRNLVL Set Fix Film life display threshold VL
Lv.2 Details To set the threshold value to display the life of Fixing Film.
When COPIER> OPTION> DSPLY-SW> FXMSG-SW (ON/OFF of
Fixing Assembly replacement message) is 1 (default: 0), this setting is
enabled.
The counter for life judgment is stored in the DC Controller. The
counter value cannot be changed and checked.
Use case It is to prevent the occurrence of fixing failure in the case of
continuing to use the Fixing Film beyond its life.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Warning is hidden.
1: Warning is displayed when the counter for life judgment reaches the
specified value.
2 and 3: Not used
Default value 0
Related service mode COPIER> OPTION> DSPLY-SW> FXMSG-SW
KSIZE-SW Set of Chinese paper (K-size) support
Lv.2 Details To set to detect/display the Chinese paper (K size paper: 8K, 16K).
Use case When using K-size paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Go through the following: COPIER > OPTION > FNC-SW > MODEL-
SZ; and if MODEL-SZ is "0: AB configuration", this mode is enabled.
Display/adj/set range 0 to 1
0: Not supported, 1: Supported
Default value 0
Related service mode COPIER> OPTION> FNC-SW> MODEL-SZ
ORG-A4R Special paper size set in DADF mode: A4R
Lv.2 Details To set the size of special paper (A4R) that cannot be recognized in
DADF stream reading mode.
When picking up A4R size original from the DADF of the Inch/AB
configuration models, the size is converted into the specified size so
that an image can be formed properly.
Use case - Upon user's request
- When picking up special paper size original from DADF
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: A4R, 1: FOLIO-R
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
PDF-RDCT PDF reduction set at forwarding
Lv.2 Details To set whether to reduce the image for transmission when converting
the image received by IFAX into PDF for e-mail/file transmission.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: With the current setting, 1: Image reduction
Default value 0
REBOOTSW Restart setting at E240 error occurrence
Lv.2 Details To set whether to reboot in the case of E240 error.
In the case of E240 error, the machine is automatically rebooted due
to the possibility of continuous operation of the drive system while the
spooled print job is cleared.
Print job can be obtained if selecting the setting not to reboot.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this at the normal service.
- Be sure to get approval from the user by telling the possibility of
continuous operation of the drive system in the case of E240 error.
Display/adj/set range 0 to 1
0: Rebooted, 1: Not rebooted
Default value 0
SJB-UNW Reserve upper limit of secure print job
Lv.2 Details To set the upper limit for the number of reserved jobs in secure print job.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: 50 jobs, 1: 90 jobs, 2: 100 jobs (Standby on the host side without
cancelling jobs)
Default value 0
WEBV-SW ON/OFF of WebDAV function
Lv.2 Details To set ON/OFF of WebDAV function.
OFF setting can reduce memory use of the machine. In addition, the
following WebDAV-related items are hidden in user mode.
- Settings/Registration> Set Destination> Register Destinations> File>
Protocol> WebDAV
- Settings/Registration> Function Settings> Send> Common Settings>
Use Divided Chunk Send for WebDAV TX
Use case When reducing memory use of the machine
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
8-151
8-151