2) Install the HDD Connector Plate first, and then HDD to the HDD Support Plate. (HDD and
screw are the ones removed in step 1).)
• 4 Screws
NOTE:
When tightening the screen, be sure to align the screw holes by lifting the HDD
Connector Plate and HDD.
HDD
Anti-vibration Damper
x4
9
Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
HDD Support Plate
HDD Connector Plate
F-9-472
HDD
HDD Connector Plate
HDD Support Plate
F-9-473
9
Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
CAUTION:
• Assembling the option HDD, be careful of the installation direction.
• Make sure that the label on the option HDD is facing up.
• Install it in the position where the HDD connector is placed in the side with screw
hole of HDD Support Plate. (opposite direction compared to the fixed HDD)
Label
3) Install the Conversion Connector.
CAUTION:
Make sure that there is no opening between the Conversion Connector and part of
HDD.
9-183
Screw hole
Connector
Screw hole
F-9-474
F-9-475
9-183