Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1252

<When the Cable Cover is removed>
15) Remove the 2 Wire Saddles. (Removed wire saddles will not be used.)
16) Remove the HDD Unit by holding it as shown in the figure below.
• 2 Screws (Removed screw will not be used.)
x2
9
Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
17)
not be used.)
• 2 Screws
■ Assembling and Installing the Removable HDD
F-9-468
1) Remove the HDD from the HDD Support Plate. (Use the installed HDD (160GB) removed
in "Removing the HDD Unit, Signal Cable and Power Supply Cable" step 17)
• 4 Screws
F-9-469
9 Installation > [TYPE-2] > Installation Procedure > Assembling and Installing the Removable HDD
Remove the fixed HDD from the removed HDD Unit. (Removed plate and screw will
x2
x4
9-182
F-9-470
HDD
HDD Support Plate
F-9-471
9-182