Canon imageRUNNER ADVANCE C5255 Series Service Manual page 803

Location Alarm Description
of Trouble Code
33 - 0011 Fixing cooling fan (front)
(FM5) /(rear)(FM6)
alarm
34 - 0003 Auto registration
adjustment
37 - 0001 For R&D
37 - 0002 For R&D
37 - 0003 For R&D
37 - 0004 For R&D
37 - 0005 For R&D
37 - 0006 For R&D
37 - 0007 For R&D
37 - 1000 For R&D
37 - 2000 For R&D
38 - 0001 For R&D
38 - 0002 For R&D
50 - 0010 Successive occurrence
of separation alarm
50 - 0014 Insufficient Scanner
Unit (Paper Back) LED
light intensity alarm
(Some of the LEDs are
OFF. Scanning can be
continued.)
61 - 0001 No staple (process tray
assembly)
62 - 0001 No staple (saddle
assembly)
7
Error•Jam•Alarm > Alarm Code > Alarm Code
Details
Cause: Disconnection of the Fixing Cooling Fans
(FM5/6) or Failure of the Fixing Cooling Fans (FM5/6)
Measures: Check the connector. -> Replace the
Fixing Cooling Fans (FM5/6).
Timeout occurred due to unsuccess in reading 10
sets of auto registration pattern.
Registration detection sensor failure, Registration
detection sensor cleaning member covered the
registration detection sensor, or no image drew on
the belt.
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
Condition unable to separate 1st sheet of original
from the ADF occurs 3 times in a row. Check rotation
of the Pickup Motor -> Check the life of the Pickup
Roller -> Check if paper lint is at the pickup slot.
In the case that the light intensity is insufficient at
LED lighting.
Operation : User message is displayed on controller
of main unit.
Printing operation is suspended when operating
staple job during a print job.
Recovery method : Replenish with staples.
Operation : Print operation is suspended after user
message is displayed on controller of main unit.
Printing operation is suspended when operating side-
staple job during a print job.
Recovery method : Replenish with staples.
7 Error•Jam•Alarm > Alarm Code > Alarm Code
Location Alarm Description
of Trouble Code
65 - 0001 Punch dust full
70 - 0001 For R&D
70 - 0002 For R&D
70 - 0003 For R&D
70 - 0004 For R&D
70 - 0005 For R&D
70 - 0006 For R&D
70 - 0007 For R&D
73 - 0004 For R&D
73 - 0006 For R&D
73 - 0007 For R&D
73 - 0008 For R&D
73 - 0009 For R&D
73 - 0010 For R&D
73 - 0011 For R&D
73 - 0012 For R&D
73 - 0013 For R&D
73 - 0014 For R&D
73 - 0015 For R&D
73 - 0016 For R&D
73 - 0017 For R&D
73 - 0018 For R&D
73 - 0019 For R&D
73 - 0020 For R&D
73 - 0021 For R&D
73 - 0022 For R&D
73 - 0023 For R&D
73 - 0024 For R&D
73 - 0025 For R&D
73 - 0026 For R&D
75 - 0001 For R&D
75 - 0002 For R&D
75 - 9101 For R&D
75 - 9102 For R&D
75 - 9103 For R&D
75 - 9104 For R&D
Details
Operation : User message is displayed on controller
of main unit.
When punching during a print job, operation varies
depending on the detection level of the punch dust
sensor.
Punch dust detection level 1: Continue operation.
Punch dust detection level 2: Suspend printing (in
case punching operated 1000 times after the level 1
detection)
Recovery method : Remove punch dust.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7-112
7-112