Canon imageRUNNER ADVANCE C5255 Series Service Manual page 976

COPIER > OPTION > FNC-SW
AMSOFFSW Disabling AMS mode
Lv.1 Details Normally, AMS mode is automatically enabled when the following 2
conditions are satisfied.
• AMS license which is an iR option is installed.
• AMS-supported Login application is activated.
When disabling AMS mode, set 1.
For North/Middle/South America and for Europe, the default is 1.
When enabling AMS mode, set 0.
Use case • When disabling AMS mode
• When enabling AMS mode (for North/Middle/South America and for
Europe)
Adj/set/operate method 1) Check that "ACCESS MANAGEMENT SYSTEM" is displayed in
Check Counter > Check Device Configuration. (If it is displayed, it
means that AMS mode is enabled.)
2)Enter 1, and then press OK key.
3) Turn OFF/ON the main power switch.
4) Check that "ACCESS MANAGEMENT SYSTEM" is not displayed in
Check Counter > Check Device Configuration. (If it is not displayed,
it means that AMS mode is disabled.)
Display/adj/set range 0 to 1
0: AMS mode enabled, 1: AMS mode disabled
Default value JP: 0, USA: 1, EUR: 1, AU: 0, CN: 0, KR: 0, TW: 0, ASIA: 0
Related service mode COPIER> OPTION> LCNS-TR> ST-AMS
Related user mode Settings/Registration > Management Settings > License/Other > Use
ACCESS MANAGEMENT SYSTEM
Supplement/memo AMS: Access Management System
When the device is in AMS mode, "ACCESS MANAGEMENT
SYSTEM" is displayed in Check Counter > Check Device
Configuration.
UA-OFFSW ON/OFF of unified auth function
Lv.1 Details To set ON/OFF of the Unified Authentication function.
Set the value to 0 when not preferring to use the Unified Authentication
function because of security concern.
Use case Upon user's request (not to use the Unified Authentication function)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
MIB-NVTA RFC-compatible character stringMIB write
Lv.1 Details As default, MIB object which NVT-ASCII can be written exists in order
to link with LUI entry value. This violates RFC order, so a problem like
garbled 2-byte characters may occur in the SNMP monitoring system,
such as the 3rd vendor's MPS.
Whether non-RFC-compatible character strings are written in MIB can
be set using this mode.
When 1 is set, only the character strings which are strictly compatible
with RFC are written. (Writing operation is executed from the SNMP
manager.) LUI is not linked.
Use case Upon user's request (operation with RFC-compatible system)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Compatible in a conventional manner, 1: RFC-compatible, 2 to 3:
Not used
Default value 0
MIB-EXT [Not used]
SVC-RUI Enabling of RUI function for servicing
Lv.1 Details To set whether to enable the RUI function for servicing (not provided
to end users).
When 0 is set, the RUI function is disabled.
When setting the value other than 0, RUI function is enabled. The
value entered becomes password to use the RUI function.
The data is cleared after the main power switch is turned OFF/ON.
Use case When preferring to use the import function of background image file of
main menu
Adj/set/operate method Enter the setting value, and then press OK key.
The data is cleared after the main power switch is turned OFF/ON.
Display/adj/set range 0 to 65535
Default value 0
LCDSFLG Enabling of local CDS server
Lv.1 Details To set whether to use the local CDS server.
When CDSFIRM is 1, this setting is enabled.
Use case When using the local CDS server
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When CDSFIRM is 1, this setting is enabled.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Related service mode COPIER > OPTION > FNC-SW > CDSFIRM
8-156
8-156