Canon imageRUNNER ADVANCE C5255 Series Service Manual page 1388

3) Adjust the 2 bosses to the hole and install the HDD Lid Retainer.
• 1 Screw (TP round end; M3x6)
CAUTION:
Be sure to use the round end screw included in the Removable HDD Kit as the TP
screw.
Boss
4) Remove the HDD Rear Cover. (Removed HDD Rear Cover will not be used.)
• 2 Screws (Removed screw will be used in step 5).)
x2
9
Installation > [TYPE-10] > Installation Procedure > Assembling and Installing the Removable HDD
Hole
F-9-850
F-9-851
9 Installation > [TYPE-10] > Installation Procedure > Assembling and Installing the Removable HDD
5) Install the HDD Drawer Unit.
• 2 Screws (Use the screw removed in step 4)
x2
■ Assembling and Installing the Removable HDD
1) Remove the HDD from the HDD Support Plate. (Use the installed HDD (160GB) removed
in "Removing the Signal Cable and Power Supply Cable" step 17.)
• 4 Screws
x4
9-318
F-9-852
HDD
HDD Support Plate
F-9-853
9-318